Cement spiral conveyor spare parts introduction

Main spare parts of the cement screw conveyor are screw blade, reducer, intermediate bearing, tailstock, flange plate, universal joint and so on.
Continuouscold rolling of the screw blade makes the surface hardening, so the hardness and wear resistance of the surface is improved, smooth and neatsurface,highoverall accuracy , the smallresistance, and the transmission efficiency is improved as well.

 

 

The universal joint is used to realize the shaft power output of different directions. According to the universal joint, it can be divided into rigid universal joint and flexible universal joint.

 

Advantages of reducer are: new hard tooth surface, high precision, small volume, light weight, strong bearing capacity, high transmission efficiency, convenient installation etc. 

 

The intermediate bearing mainly bears the weight of the shaft, the deformation of the shaft and the radial load generated by the rotation. The intermediate bearing is divided into two kinds:sliding bearing and rolling bearingaccording to the basic structure of the bearing and the friction form of the contact part.

 

How to calculate the transmission capacity of the screw conveyor?

1, the density of material and property of the material

2, the selection of the screw conveyor model size and delivery distance, the installation direction, etc..

Approximate calculation formula of screw conveyor:

Capacity Q = 47 D2 N TΦP C（t/h）

Formula:

Q - transport capacity (t/h);

D - conveyor diameter m;

N-- screw shaft speed r/min;

T - pitch m;

Φ - material filling coefficient, under normal circumstances, the grain by =0.25 - 0.4, =0.25 - 0.35 psi oil, wheat bran, rice bran flourψ=0.25, ψ =0.2

P - bulk density  t/m3;

C - conveyor angle coefficient;

S - helical blade pitch (m), S=0.8D of the face, with a blade of S=D.

Calculation formula for ultimate speed:

Formula: N /min - helical axis limit rotational speed (Y);

A - the coefficient of the material properties, the general desirability of grain and oil materials is A=65.

Barite powder screw conveyor is ready to deliver to Kuwait

On 11th Jan. 2016,pipe screw conveyor equipped with feeding hopper and gate valve designed for Barite powder transporting system are finished production and ready for delivery to Kuwait.
This system is designed with 60tph capacity,material density is 2t/m3,material temperature is 50℃. After learning the demand of our client,PK engineer configured LSY250 pipe screw conveyor to meet the requirement of 10.2m conveying length and inclined angle,detailed information shown as follows:
Processed material: Barite powder
Material density :2t/m3
Material temperature: 50℃
Screw conveyor conveying distance:10.2m
Screw conveyor Vertical height:9m
Screw rotating speed:222rpm
Power:15kw
Voltage:440v, 50HZ
For further feedback and information,we will follow up our client. PK Machinery also provides trough screw conveyor,vibrating screen,bucket elevator,scraper conveyor and belt conveyor,please contact us with any technical enquiries, PK engineers will advise on the best solution for your needs!

The Main Points for Maintenance the Screw Conveyor

Screw conveyor is bulk material handling equipment, which is widely used in chemical, metallurgy, paper making, and construction industries, etc. What is the main point for maintenance the screw conveyor? Here PK Machinery will show you the answers.

1.The connecting shaft, hanger bearing device and head to the tail bearing should be lubricated before operating.

2.Check the each joint, flange whether cracking and open welding or not and whether the connection bolt are loose broken off.

3. If helical blades have rubbed housing phenomenon, you must check the centerline of wear hanging tile and install whether have the deviation.

4.Check the reamer in the daily operation, shut down for inspection if there are some abnormalities. 

screw conveyor

The key points for screw conveyor selection

1.Conveyor capacity
Screw conveyor conveying capacity refers to the amount of material per unit time.Users should consider whether the conveyor can support the use of other production equipment before design in order to design a reasonable conveyor model.
2.Conveying speed
Conveying speed can improve the transmission capacity. For conveyor which adopts chain as traction, the transporting speed should not be too fast, in order to prevent the power load increasing .
3.Component dimensions
The component dimensions of conveyor includes conveyor trough width or pipe diameter , etc. Which directly affect the transmission capacity of screw conveyor.
4.Conveyor length and inclination
Conveyor length and inclination directly affects the total resistance and required power of the conveyor. Screw conveyors installation can be level and inclined, so please let us know the using condition when select the model.
5.Screw conveyor motors
Motor selection can be speed controlled motor or general motor to control the conveying speed and throughput per hour.
6.Others
Whether hopper should be considered in the inlet or not,as well as the feeding hopper size.  

What is the required parameter for screw conveyor model selection?

In our daily life,screw conveyor is a common used equipment.In order to ask manufacturers  to select model and quote price more quickly and accurately,we need to provide complete machine technical parameter and requirement to manufacturers. Here,PK Machinery lists the parameter needs to offer for reference:
1. Material name _______
2. Material size _______mm
3.Size distribution_______%?
4 .Material water content _______%?
5 .Handling capacity________t/h
6 .Material density ________t/m3?
7 .Material temperature _______ ℃?
8. Material is corrosive or not_______?
9. Distances between inlet and outlet ______m
10.Voltage __V__HZ 3 phase
11.Upstream and downstream equipment _______
12.Working environment _______

 

Thus PK Machinery can select model as per your requirement.Further information please click:www.pkmachinery.com 

What Reasons Lead to Screw Conveyor Blade Damage

Damages may occur in the process of using screw conveyor,screw conveyor blade damage is the most common one. Here PK Machinery will discuss the screw conveyor wear in using process.
General wear parts include: hanging bearing, tail & end of the screw conveyor and screw blade,the reasons lead to wear is not only due to natural causes : temperature, environment and material, but also due to structure factor and human factor. Here, we will analyze what are the reasons leading toscrew conveyor blade damage.

 

Generally speaking, screw conveyor is not easy to occur blocking phenomenon in the outlet, it can run at a low speed, reduce the energy consumption, design with a long conveying distance. However, when convey life garbage and organic plant, it may cause the damage of screw blade.
Thicker spiral blade will be anti- wear and durable, it is suitable for conveying materials, screw blade mainly wears in the blade edge.The farther the screw blade away from the axis of rotation, the larger the force it will bear and the more the cracks it will form.